D858WTPB

Interactive WXGA Short-Throw Projector

Vivitek D858WTPB Front MediumRes
Overview+-

The Vivitek D858WTPB is an interactive short-throw projector with a high brightness of 3000 ANSI lumen. Built-in the PointBlank (PB) technology from TI® can turn any surface into an interactive whiteboard (IWB). Capable of delivering a large 2.25m diagonal image from only a metre projection distance. It is 3D-ready and with its full featured connectivity, this projector is ideally suited for multimedia applications in the classroom. Offering a wide range of connectivity options and the ability to present wireless through the optional ViviNet dongle. The D858WTPB is the ideal high-performance classroom projector solution.
Vivitek D858WTPB RightHero MediumRes
Vivitek D858WTPB IO Ports LowRes.png

Key features

  • Bright 3000 ANSI lumens with a native WXGA resolution
  • Large 88” image diagonal from only 1 meter away
  • Built-in TI® PointBlank functionality turns any surface into an interactive whiteboard
  • No calibration needed, so the interactive pen stays accurate
  • 3000:1 contrast ratio for extraordinary crisp image detail
  • High-efficiency lamp that lasts up to 6,000 hours (in Eco Mode)
  • 3D ready for gaming, movies and education
  • Sealed optical engine to keep dust out
  • Connectivity options including: HDMI v1.3, DVI-I, VGA-Out, RJ45 and RS-232C
  • Powerful 10W audio speaker
DLP® Technology

DLP® Technology

DLP (Digital Light Processing) is a display technology from Texas Instruments (TI). The technology inside is often referred to as DMD (Digital Micro-Mirrors). It consists of an array of mirrors where each mirror represents a pixel element. For example, a high-definition DLP projector or rear projector with 1920 x 1080 pixel resolution would have over 2 million tiny mirrors. Each mirror is attached to an electronically driven hinge that controls the amount of colored light that is reflected from
BrilliantColor™

BrilliantColor™

BrilliantColor from Texas Instruments is a multi-color processing technology that produces vibrant images. BrilliantColor technology uses up to six colors, instead of just the three primary colors, red, green and blue, to improve color accuracy and brightens secondary colors.
3D Ready

3D Ready

A projector that is 3D Ready can accept a 120Hz frame-sequential 3D signal from a computer. These projectors are not compatible with the HDMI 1.4 3D specification used on 3D Blu-ray players and set-top boxes. 3D ready uses DLP Link Technology from Texas Instruments.
DVI

DVI

A wideband digital video interface that can carry uncompressed high-definition video and control signals in the same cable.
Specifications+-
Native ResolutionWXGA (1280 x 800)
Brightness3000 ANSI Lumens
Contrast Ratio3,000:1
Max. Supported ResolutionUXGA (1600 x 1200) @60Hz
Native Aspect Ratio16:10
Lamp Life and Type4,000 / 6,000 Hours (Boost / Std. Mode), 220W
Display TypeSingle chip DLP® Technology by Texas Instruments
Chip Size0.65” DMD
Throw Ratio0.35:1
Image Size (Diagonal)43.8"- 438"
Projection Distance0.5 - 5 m
Projection LensF = 2.87, f = 7.36 mm
Zoom RatioFixed Lens
Offset (Based on Full Image Height) 123%
Keystone CorrectionAuto Keystone, Vertical +/- 15°
Speakers10W
Video CompatibilitySDTV(480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i/p), NTSC (M, 3.58/4.43 MHz), PAL (B, D, G, H, I, M, N), SECAM (B, D, G, K, K1, L)
I/O Connection Ports VGA-In (15pin D-Sub), HDMI, DVI-I, Composite Video, Audio-In (RCA), Audio-In (Mini-Jack) (2), VGA-Out (15pin D-Sub), Audio-Out (Mini-Jack), RJ45, 12v Trigger, RS-232, Microphone (Mini-Jack)
Dimensions (W x D x H)306 x 206 x 104 mm
Weight2,72 kg
Noise Level33dB/36dB (Std. / Boost Mode)
PowerSupply: AC 100-240V, 50/60Hz Consumption: 230 W (Std. Mode), 280W (Boost Mode), <1W (Standby Mode)
Spare Lamp P/N5811116713-SU
Remote Control P/N5041818400
Standard Accessories VGA Cable, User Manual (CD), Lens Cap, Carrying Case, Quick Start Guide, Warranty Card (by region), Remote Controller (with battery), PointBlank Interactive Pen / nbr, AC Power Cord
Optional Accessories Spare Lamp P/N: 5811116713-SU , Remote Control P/N: 5041818400
WarrantyStandard Warranty: 3 years projector / 1 year on lamp or 1.000 hours whichever comes first, Education Warranty: 5 years projector / 3 years on lamp or 2.000 hours whichever comes first
UPC Code814964 335395
Image gallery+-
Accessories+-

Replacement Lamp

D851 D1185

Power: 220 W
Part number: 5811116713-SU

IR Remote Control

VivitekD7 D8 D9 D5000 Series
Part number: 5041818400
Documentation+-
Distance Calculator+-
Vivitek Projector Distance Calculator v2.0

 

>


 

A
A = <> <>
Fixed lens - on axis
Note on using the projector distance planning calculator and tips for projector installation:
Calculator accuracy +/-5%. The calculator is designed to help you plan your installation and find the right projector. It is not designed to provide exact dimensions. When calculating the throw distance, bear in mind that the distance is measured from the front of the lens to the projection surface, except for Ultra Short Throw projectors with a mirror system. Where possible, attempt to position the projector in the middle of the zoom range , which is where the optics is optimized for. Try to avoid the extreme outer boundaries as the projector lenses has variance and performance tolerances that could make the screen not being filled, or the image being larger than the screen, caused by small variances in the optical systems. If you need to be at the extreme outer boundaries, we recommend that you order the projector and test the actual distance in your environment before fixing any mounting parts to the wall or ceiling.